Search results

The purpose of this paper is to prepare a new modified activated carbon fibers (ACFs) of high specific capacitance used for electrode material of supercapacitor.

In this study, the specific capacitance of ACF was significantly increased by using the phenolic resin microspheres and melamine as modifiers to prepare modified PAN-based activated carbon fibers (MACFs) via electrospinning, pre-oxidation and carbonization. The symmetrical supercapacitor (using MACF as electrode) and hybrid supercapacitor (using MACF and activated carbon as electrodes) were tested in term of electrochemical properties by cyclic voltammetry, AC impedance and cycle stability test.

It was found that the specific capacitance value of the modified fibers were increased to 167 Fg^-1 by adding modifiers (i.e. 20 wt.% microspheres and 15 wt.% melamine) compared to that of unmodified fibers (86.17 Fg^-1). Specific capacitance of modified electrode material had little degradation over 10,000 cycles. This result can be attributed to that the modifiers embedded into the fibers changed the original morphology and enhanced the specific surface area of the fibers.

The modified ACFs in our study had high specific surface area and significantly high specific capacitance, which can be applied as efficient and environmental absorbent, and advanced electrode material of supercapacitor.

The purpose of this paper is to study a new method with which multi‐walled carbon nanotubes (MWNTs) can be dispersed and aligned in low density polyethylene (LDPE) for improving its mechanical properties.

Dispersion and alignment of MWNTs in LDPE matrix are enhanced by ultrasonic vibration, solution casting and melt mixing and flow moulding method. The properties of the composite are characterised using scanning electron microscopy, tensile testing machine and the Izod impact testing machine.

It is found that MWNTs in LDPE achieve some dispersion and alignment resulting in improvement in LDPE's strength and toughness.

Polymer/CNTs nanocomposites are expected to have good process ability of the polymers and high mechanical and functional properties of the CNTs. Enhancing dispersion and alignment of MWNTs in the polymer matrix will promote and expand the applications and development of polymer/MWNTs nanocomposites.

The method that enhances MWNTs dispersion and alignment in LDPE matrix provides a new way for alignment of other CNTs in polymer matrix.

With the rapid development of materials informatics and the Semantic Web, the semantic-driven solution has emerged to improve traditional query technology, which is hard to discover implicit knowledge from materials data. However, it is a nontrivial thing for materials scientists to construct a semantic query, and the query results are usually presented in RDF/XML format which is not convenient for users to understand. This paper aims to propose an approach to construct semantic query and visualize the query results for metallic materials domain.

The authors design a query builder to generate SPARQL query statements automatically based on domain ontology and query conditions inputted by users. Moreover, a semantic visualization model is defined based on the materials science tetrahedron to support the visualization of query results in an intuitive, dynamic and interactive way.

Based on the Semantic Web technology, the authors design an automatic semantic query builder to help domain experts write the normative semantic query statements quickly and simply, as well as a prototype (named MatViz) is developed to visually show query results, which could help experts discover implicit knowledge from materials data. Moreover, the experiments demonstrate that the proposed system in this paper can rapidly and effectively return visualized query results over the metallic materials data set.

This paper mainly discusses an approach to support semantic query and visualization of metallic materials data. The implementation of MatViz will be a meaningful work for the research of metal materials data integration.

With the increasing spread of ontologies in various domains, units have gradually become an essential part of ontologies and units ontologies have been developed to offer a better expression ability for the practical usage. From the perspectives of architecture, comparison and reuse, the purpose of this paper is to provide a comprehensive survey on four mainstream units ontologies: quantity-unit-dimension-type, quantities, units, dimensions and values, ontology of units of measure and units ontology (UO) of the open biomedical ontologies, in order to address well the state of the art and the reuse strategies of the UO.

An architecture of units ontologies is presented, in which the relations between key factors (i.e. units of measure, quantity and dimension) are discussed. The criteria for comparing units ontologies are developed from the perspectives of organizational structure, pattern design and application scenario. Then, the authors compare four typical units ontologies based on the proposed comparison criteria. Furthermore, how to reuse these units ontologies is discussed in materials science domain by utilizing two reuse strategies of partial reference and complete reference.

Units ontologies have attracted high attention in the scientific domain. Based on the comparison of four popular units ontologies, this paper finds that different units ontologies have different design features from the perspectives of basis structure, units conversion and axioms design; a UO is better to be applied to the application areas that satisfy its design features; and many challenges remain to be done in the future research of the UO.

This paper makes an extensive review on units ontologies, by defining the comparison criteria and discussing the reuse strategies in the materials domain. Based on this investigation, guidelines are summarized for the selection and reuse of units ontologies.

Material extrusion technology is considered to be an effective way to realize the accurate and integrated manufacturing of high-performance metal diamond tools with complex structures. The present work aims to report the G4 binder that can be used to create metal composite filament loading high concentrations of large diamond particles through comparative experiments.

The quality of filaments was evaluated by surface topography observation and porosity measurement. And the printability of filaments was further studied by the tensile test, rheological test, shear analysis and printing test.

The results show that the G4 binder exhibits the best capacity for loading diamonds among G1–G4. The L4 filament created with G4 has no defects such as pores, cracks and patterns on the surface and section, and has the lowest porosity, which is about 1/3 of the L1. Therefore, the diamond-containing composite filament based on G4 binder exhibits the best quality. On the other hand, the results of the tensile test of L5–L8 filaments reveal that as the diamond content increases from 10% to 30%, the tensile strength of the filament decreases by 29.52%, and the retention force coefficient decreases by 15.74%. This can be attributed to the formation of inefficient bonding areas of the clustered diamond particles inside the composite filament, which also leads to a weakening of the shear strength. Despite this, the results of the printing test show that the diamond-containing composite filament based on the G4 binder has reliable printability.

Therefore, the G4 binder is considered to solve the most critical first challenge in the development of diamond-containing filament.

In recent years, a new type of double-layered containment structure of nuclear power plant has been built in China, named ACP1000 NNP. This paper aims to propose a new method to mitigate the seismic responses of this type of the structure.

The new base isolation structure (BIS)- tuned mass damper (TMD) structure was proposed and implemented only by modifying the connection between various components of NPPs, and the application of this concept design in ACP1000 was skillfully realized.

The new structure adopts the combination of structural form and function, adopts appropriate amplification of the seismic response of the secondary component, possesses advantages in explicit damping mechanism, good damping effect, robustness of seismic structures, simple implementation process, etc., and meets the special seismic safety requirements of the NPPs.

This seismic and hazard mitigation and BIS-TMD structure can avoid the risk of ACP1000 accidents caused by horizontal earthquakes.

Green building (GB) has been actively promoted in many countries, but it has not become the mainstream in Chinese construction industry due to various reasons. This paper aims to investigate the major driving factors for the development of GB with reference of the Chinese construction market. Twenty-one factors influencing the development of GB were identified through a literature review, questionnaire survey, and face-to-face interview with professionals in the construction industry. Structural equation model was established to identify the critical driving path and three critical factors hierarchies. The result of model analysis also verifies the theoretical hypotheses that government body is the biggest motivation for the development of GB, and the path coefficient is high. The results demonstrate the necessity for the formulation of incentive policies and power of GB propaganda. We identify distinct government and market effects and then induce a government-led GB development path. These findings provide a valuable reference for government body aiming at promoting GB in the construction industry to put forward relevant policies and incentives and for the market body to understand the major driving factors and path when making decisions.

This study aims to find a novel solution to the calibration of three-axis magnetometers to suppress errors of sensors. The nature of the calibration process is parameter estimation and hence the purpose of the paper is to calculate the error parameters and eliminate sensor errors and obtain the true value of the pure magnetic field.

The paper puts forward a calibration method using an alternative iteration looping optimization (AILO) to estimate the parameters. The proposed method divided the parameters to be estimated into two parts: a portion less than one and the other greater than one. Parameters with different orders of magnitude are calculated respectively, which let one part to be a known quantity and the other part is derived by the known quantity; the derived quantity is used to calculate the known quantity again, and looping iteration multiple times until the iteration termination condition is satisfied.

The simulation and experimental results indicate that the calibration accuracy is improved at least by two orders by the proposed method compared to the two-step method and the linear decreasing weight particle swarm optimization (LDW-PSO) algorithm which proves the validity of the proposed method.

The proposed method can improve the calibration accuracy of total magnetic field, which provides a reference to the calibration of three-axis magnetometers.

A calibration method based on the AILO is proposed in this paper, which is used to improve the calibration accuracy of the three-axis magnetometer.

Little research has focused on abusive supervision in the context of project management, despite its prevalence and detrimental influence on the psychological health of subordinates. Therefore, drawing on affective event theory (AET), this study sought to investigate supervisor-level antecedents of abusive supervision by considering the mediating role of emotional exhaustion and moderating role of psychological resilience.

Utilizing a time-lagged design, data were collected through questionnaires from project managers and their immediate subordinates in construction projects. PROCESS macros were utilized to analyze a sample of 241 supervisor-subordinate dyads.

The findings revealed that time pressure and emotional exhaustion significantly predicted project manager abusive supervision. The authors also found that emotional exhaustion mediates the relationship between time pressure and project manager abusive supervision. Furthermore, the results show that highly resilient project managers become less emotionally exhausted when facing time pressure. Lastly, psychological resilience moderated the indirect effect of time pressure on project manager abusive supervision through emotional exhaustion.

According to Fordjour et al., abusive supervision is a critical factor that deteriorates the psychological health of subordinates in the project. Nevertheless, this phenomenon remains uninvestigated. Therefore, this research contributes to the project management literature by investigating key predictors of abusive supervision, thus filling both a theoretical and practical gap.

Based on the theory of customer citizenship behavior (CCB), the purpose of this paper is to explore the antecedents and consequences of investor citizenship behavior in the field of crowdfunding and have an in-depth study of the interaction effect between investors’ perceptions of novelty and investors’ motivations.

Based on the CCB theory and self-determination theory, the authors develop hypotheses and collect questionnaire data (a sample of 226 crowdfunding investors) from crowdfunding websites to test models and get conclusions by SPSS and smartPLS 2.0.

The results indicate that internal and external motivations significantly influence investors’ citizenship behavior, which further affects investors’ stickiness intentions. Furthermore, results show that investors’ perceptions of novelty moderate the relationships between internal/external motivations and citizenship behaviors.

This paper offers an in-depth explanation of the citizenship behaviors in crowdfunding, which could be an example for studying the motivations of investors’ citizenship behaviors and could also serve as a starting point to introduce the stickiness intention theory of e-commerce and virtual community into crowdfunding area. In addition, this study also made an empirical analysis of how the perceived project novelty affects the relationships between investors’ motivations and citizenship behaviors.